iCA05 - Graphic LCD Development Kit (with Microchip 28-pin PIC16 chip)

iCA05 - Graphic LCD Development Kit is a complete set of tools for Graphic LCD application using the Microchip PIC16F886 and come with Hi-Tech C source code.

 

More details

Pack content

1 x iCM05 - Blank IO Board

Blank prototype board for PIC 8 IO pin with power supply input. 

x iCP05 - iBoard Lite (Microchip 28-pin PIC16 & PIC18 Development Board)

iBoard Lite - Microchip 28 Pin PIC IO Board with low cost, easy interfacing, high performance, user friendly device and come with free Hi-Tech C source code.

2 x iBoard Extension Cable

iBoard Extension Cable is used to extend the iBoard module.

1 x Code 02 - Basic Oscilloscope

This program shows how to use the iBoard with a 128x64 GLCD to display analog input waveform.

1 x iCM19B - External LCD Port (128x64 GLCD)

External LCD Port is used to allow user to extend the 128x64 Graphic LCD Display.

x 128x64 Graphic LCD Display (Blue Backlight)

128x64 Graphic LCD Display (Blue Backlight) can be used to display up to maximum of 128 x 64 pixels.

On sale On sale!
$49.90

instead of $58.90


Availability: In-stock

3 items in stock

Warning: Last items in stock!

Add to my wishlist

  • Currently 4.75/5

Rating: 4.8/5 (4 votes cast)

iCA05 - Graphic LCD Development Kit (with Microchip 28-pin PIC16 chip) , 4.8 out of 5 based on 4 ratings

13 other products in the same category:

iCA05 - Graphic LCD Development Kit is come with complete set of tools that fulfilled any type of applications (Simple Oscilloscope, Signal Monitoring, Chart Display, etc..). With the external GLCD port, user can easily mount the GLCD at the casing. Also iBoard includes analog ports for sensor input (Temperature, Light, Voltage) with the connections to PIC pins.

 

 iBoard connection as follows:                       
    PIN  Module                         
 -------------------------------------------                        
 PORTB [J17/J18]    iCM19B - A PORT 
 PORTC [J11/J12]        iCM19B - B PThe features of iCP05 are listed as followings:
  • Easy interfacing, high performance and user friendly device
  • Used for programming the popular 28-Pin Flash PIC MCU, includes PIC16F and PIC18F family
  • Excellent flexibility that allows user to expand the board with plug and play modules

 

iBoard Lite Features: 

  • NCP1117 - provide +5V or +3.3V Mode voltage selection to PIC Microcontroller
  • 20MHz crystal - allow PIC run at maximum speed
  • Tact Switch - PIC reset circuit
  • On/Off button - power on off switch
  • Green LED - power on indicator
  • Red LED - 3.3V mode
  • Screw Terminal - direct wiring connection (battery connection)
  • VS1 and VS2 - different input power supply (PIC supply and external module supply)
  • ICSP Connector - on-board PIC programming
  • LCD Display Port - direct LCD connection with LED backlight control (LCD Module is not provided)
  • 28-Pin IC Socket - board-mounted female connectors
  • Supply Measurement - detect input voltage level

 

iBoard Lite Peripheral Features:

  • IO Port - 8 channels
  • Analog Port - 8 channels 
  • Servo Motor Port - 4 channels 
  • USART Port - 1 channel
  • Communication Port (SPI/I2C/USART/PS2/USB) - 1 channel
  • Stepper Motor Port  (ULN2003A - 500mA Darlington driver) - 1 channel
  • DC Motor Port (L293D - with speed and direction control) - 1 channel
  • (ULN2003A & L293D are not provided)
  • Boost/Buck Converter - 1 channel
  • Off-board On/Off Switch - SW1 (VS1 Power Supply), SW2 (VS2 Power Supply)

 

Dimension:

  • iBoard Lite size: 100mm X 55mm
  • 128x64 GLCD Module size: 113mm x 65mm x 10.5mm
  • Standard 2.54mm Pin Socket for ICSP (In-Circuit Serial Programming) connection

 

Package List: 

  • 1x iCP05 - iBoard Lite (Free upgrade to PIC16F886)
  • 1x iCM05 - Blank IO Board 
  • 1x iCM19B - External LCD Port (128x64 GLCD) 
  • 1x 128x64 Graphic LCD Display (Blue or Yellow Backlight) with Pin Socket
  • 2x iBoard Extension Cable: Link
  • Code 02 - Basic Oscilloscope 

 

iCA05 Wiring Connection: 

  • A0 (AN0) [J5] - Analog Signal Input
  • PORTB [J17/J18] - iCM19B [A PORT]
  • PORTC [J11/J12] - iCM19B [B PORT]
  • Cautions: RED cable must be always at the same side of [+] label! 
  • Wiring mistake will permanently damage the output modules.

 

Download: 

 

Source Code:

  • Download link will be provided immediately after payment
  • Please download the file at [My Account][My orders][Order details][Reference]

 Code01_Download.jpg

Customers feedback

Pack content

Cart  

No products

Shipping $0.00
Total $0.00

Cart Check out