The L293D is a dual H-bridge driver which able to control two DC motors in forward and backward direction.

PWM (Pulse Width Modulation) & Frequency Generator can be used to control PWM pins, generate frequency signals or act as Digital-to-Analog Converter (DAC) with simple RC filter.

The iM02C is a DC gear motor with 2.7Kg.cm torque, plastic gear box and operated from 3V to 12V.

This L293D is a Quadruple Half-H Drivers to drive the inductive loads (relays, DC and stepping motors).

This PIC12F683 is a 8-pin Flash-based 8-bit microcontroller with 5+1 I/O Pins, 4x 10-bit ADC, 1x comparator, 1x CCP peripheral and 256 bytes of EEPROM data memory. 

This PIC16F1847 is a 18-pin Flash-based 8-bit microcontroller with 15+1 I/O Pins, 12x 10-bit ADC, 5-bit DAC, 2x comparator, 2x ECCP, 1x A/E/USART, 2x MSSP(SPI/I2C), 12x Cap Sense and 256 bytes of EEPROM data memory. 

dsPIC programming adapter which can supports the PIC24F, dsPIC30 and dsPIC33 family by using single ZIF socket

1x12 IO Port is used to extend the 2x6 IO port to 1x12 IO pins for the breadboard connection.

AP1117E50G-13 is a 5V low dropout positive regulator with 1A output current at 6.4V to 18V input supply.

4x20 LCD display can be used to display up to maximum of 80 characters. Free Hi-Tech C coding is provided for the LCD control.

Pin Socket (2.54mm, Right Angle, 1x11 Way)

8x IO Port is used to extend the normal IO port to 8x IO with GND pins for the switch input.